Allure (Clear) · Ring
(1) Get a piece of string and wrap it around your finger firmly. (making sure it is how you would want the ring to fit; that means it should not be loose or extremely tight).
(2) Mark the string to get the circumference (in mm).
(3) Lay the string or paper down against a ruler to measure the circumference (in mm).
(4) Please refer to the table below to match your circumference (in mm) against our sizes shown as numbers.
(5) Please choose the ring size that is closest to your circumference if you are in-between sizes.
Alternatively, if you have an existing ring, please measure the internal diameter of your current ring and use the chart to measure diameter against the our sizing.
Average ring size for women is US 6-7 (or UK M-O).
Please measure your finger when they are warm as cold fingers will measure smaller.
If you are still unsure, we advise you to purchase a ring sizer to measure your finger before making an order.
Here at Krystal Haus, we source quality metals and use high quality plating. With that said, fashion jewellery (including plated, 925 Sterling Silver and expensive jewellery brands) can experience normal wear and tear like this over time. To extend the life of your jewellery, please give them occasional breaks and to keep them away from any moisture and creams.
Please follow these tips to maintain the quality and prevent early tarnish:
- Avoid moisture & sweat especially after a workout
- Wipe with soft cloth to remove dust and oils
- Do not sleep in your jewellery; use provided pouch to keep your pieces safe
- Avoid chemicals (especially hand cream)
- Wait for hand sanitizer to dry completely before wearing rings
- Avoid bathing, showering or washing your hands with jewellery on
- Wait for hand/face cream to dry before putting on any jewellery
- Apply a layer of polymer coating/clear nail varnish on the inside of your rings
Give your pieces a wipe with a soft cloth to clean them. You can also keep them in the Krystal Haus pouch that comes free with every order, away from humidity, when not in use in order to minimise scratching and oxidation. By taking precautionary steps and proper care of your jewellery, you can say goodbye to unsightly stains and marks.
Got the green finger?
We’ve all experienced it at one point. We spend a whole day wearing our favourite jewellery, running errands and feeling fabulous. We return home, release ourselves from our jewels and the weight of a long day, only to discover a peculiar and unwelcome sight: Green Finger.
What is this phenomenon and why does it happen when wearing certain types of jewellery? Contrary to popular belief, the ring of skin that turns green underneath a piece of jewellery doesn’t occur due to the poor quality of the ring, nor is it harmful. It is a perfectly normal, yet rare, response to certain materials within the jewellery, and can appear when wearing fine expensive jewellery just as much as with more affordable options. But how does it work, and how can it be prevented?
Please note: Traces of copper will be found in Gold/Rose Gold plating as this contributes to the colouring of the metal. In some extreme cases of sensitive, highly acidic skin, you may experience some oxidisation (slight greening). The other main cause of oxidisation is chemicals found in hand creams. This is in fact a common trait in even the finest of jewellery, however if you wish to get more information on our plating and how to prevent any oxidisation, we advise you to read on further to understand why a persons finger might turn green and how to prevent it.
If you are allergic or sensitive to metals or have had green tainting before then you are likely to experience the same reaction. Those that are sensitive to metals should not purchase copper/brass based jewellery and instead opt for our sterling silver or solid gold jewellery. Our sterling silver 925 jewellery (containing 92.5% sterling silver and 7.5% copper or alloy) may be a better option for you if have had green tainting before. We take no responsibility or liability for any reactions that may take place; It is the responsibility of the customer to ensure all precautions are taken as we are unable to know each individual's allergies and sensitivities.
Why does my finger turn green?
The patch of skin in contact with a ring turns green when the materials oxidise. This means they react to the pH levels of your skin and create a tarnish, which then leaves a stain on the skin. People who happen to have a higher acidic pH within their skin tend to experience this phenomenon more often and, whilst rare, it’s worth knowing what to do when such an instance arises. Another common culprit is the chemicals in your hand creams which will cause the metal to oxidise even if your skin is not sensitive to metals.
The most common ingredient in any piece of jewellery that causes this scenario is copper. Copper is a useful alloy (stabilising material) that is combined with silver or gold-plated jewellery in order to secure the shape and consistency of the piece. Pure gold and silver are naturally too soft to work with, and therefore must be alloyed (stabilised) with other materials in order to create a secure, good-quality piece of jewellery. For example, the 925 sterling silver jewellery that we offer here at Krystal Haus, is composed of 92.5% silver, and 7.5% copper alloy (hence, the number 925). This formula results in the highest quality silver jewellery, and is used by high-end brands as well as more affordable fashion jewellery brands, and therefore it must never be assumed that a trace of copper equals poor quality. Quite the contrary, it makes your jewellery stronger.
What can I do to prevent my skin turning green?
If you are one of the few people who experience staining when you wear jewellery, there are some steps you can take to prevent such occurrences and better enjoy your accessories.
· Keep the area dry
Take off your rings before you wash your hands, shower, or go swimming. Damp skin can often expedite the process of oxidation and cause a more noticeable green stain on your skin. If you are going swimming, it’s especially important to remove your jewellery, as the chlorine will leave a green stain and also damage your jewellery!
· Pay attention with lotions
Chemicals found in lotions can also react to the materials in your jewellery, therefore causing a darker stain on your skin. Make sure the lotion has absorbed into your skin completely before putting on your rings.
· Ask about what materials are in your jewellery
Whilst green staining can happen from many different types of jewellery—both high and low quality, it is true that lower quality jewellery is more likely to cause a stain. Always be aware of what materials are present in your rings, in order to avoid the Green Finger. Stainless steel, 925 sterling silver, platinum, rhodium-plated and gold-plated materials are all made from safe materials that are good for sensitive skin, and yet can still cause some staining. Try to avoid nickel, as it is the cheapest and lowest quality material that can be found in jewellery, and is known to cause irritation and infection. Krystal Haus jewellery do not contain nickel. If you are unsure, please contact us at email@example.com.
· Apply a polymer barrier
One of the best and most effective ways to avoid the green finger is to apply a polymer barrier to the inner band of your rings. This effectively creates a barrier between the jewellery and your skin, which prevents oxidisation and staining. A jewellery shield product is cheap to buy, and you will need to reapply every few weeks once it has worn away. This is by far the cheapest and most efficient way of reducing green finger without splashing out on expensive solid-gold or solid-platinum accessories.
· Try clear nail polish
If in dire immediate need, another alternative to a polymer barrier is clear nail polish. Just as with a polymer barrier, you can apply a layer of nail varnish to the inside of your rings in order to form some protection between the metals and your skin. This method is less effective, however, and can also change the appearance of your jewellery.
What do I do to treat a green finger?
Knowing how to avoid jewellery staining is useful, but you’re probably reading this article because you have already fallen prey to the unfortunate Green Finger. What can you do to remove the staining?
The first and most obvious step is to remove the stain by scrubbing your skin with soap and warm water. Use a nailbrush to provide a little more friction. If this doesn’t work, you can also use make-up remover or rubbing alcohol for more stubborn stains. Wipe over the affected area with some cotton, and then rinse of with warm water and soap. For particularly dark and troublesome stains, you may also use a non-acetone nail varnish remover. Again, use a cotton pad to apply gently over the stain, and rinse with soap and warm water. This method should be your last option however, and should not be used on a regular basis, as it is harsher on the skin and can cause dryness.
How will Krystal Haus jewellery affect my skin?
Here at Krystal Haus, we only use high quality 925 sterling silver, platinum-plated, rhodium-plated and 18k gold-plated jewellery in our products. You will never find nickel in our pieces, which is a cheap, low-quality metal that is known to cause irritation and infection. If you have sensitive skin, jewellery that contains platinum, rhodium and stainless steel is especially known to be less reactive, and will most likely compliment your skin type.
All these products involve some measure of copper, whether it is to shape and strengthen the pieces, or lend them their gorgeous tint and sheen (as with our popular rose-gold jewellery). Again, copper is found in most high-end jewellery, and is a perfectly safe material. If you find that the trace of copper is causing slight staining, you can follow the simple steps above to prevent and treat the marks, or alternatively, opt for solid gold / stainless steel base jewellery.
Are there any options for sensitive skin?
If you know you have sensitive skin and have had a reaction with either copper, brass, 925 sterling silver, Gold-plated, Palladium/Rhodium plated jewellery - you are likely to have the same reaction again. It is recommended that you opt for solid gold jewellery instead. We are are looking to add 18K solid gold jewellery some time in the near future so keep a look out for that .
If you would like more information, please contact us at: firstname.lastname@example.org and our support team will be happy to help.